Analog Level Sensors / Transducers

KPSI 300DS – 0.50% FS Deep Submersible Transducer

Waer Level Sensors KPSI_300DS

 

 

 

The KPSI 300DS submersible hydrostatic level transducer is specifically designed for small bore applications and to meet the rigorous environments encountered in deep water level measurements.

Applications
  • Surface water monitoring
  • Tailrace and forebay monitoring
  • Groundwater monitoring
  • Oceanographic research
  • Down hole
  • Hydraulic Fracturing
Features
  • Sensor Type Analog Water Level Sensors
  • Type Sealed
  • Nose Cap Ported 
  • Body Welded 316SS or Titanium
  • Pressure Range 0 – 310 to 3015 psi
  • Custom level ranges up to 692 ft. (211 m) H2O
  • Output/Span 0 – 10 V, 0 – 2.5 V, 0 – 4 V, 0 – 5 VDC, 1.5 – 7.5 V, 4 – 20 mA
  • Accuracy ± .5% FS
  • Supply Voltage 9 – 28 V
  • Operating Temperature -20 – 60 °C
  • Overpressure 2X FS
  • Port Material 316 SS, FKM, Polyoxymethylene
  • Pressure Port/Fitting Ported
  • Optional lifetime lightning protection
  • Warranty Two years

KPSI 320 – 0.25% FS Submersible Level Transducer

Water Level Sensors -KPSI 320 330

The KPSI 320 is a submersible hydrostatic level transducer specifically designed for small bore applications and to meet the rigorous environments encountered in ground water level measurements.

Applications
  • Surface water monitoring
  • Well monitoring
  • Groundwater monitoring
  • Pump control
  • Slug tests
  • Level control
  • Ballast tank control
Features
  • Sensor Type Analog Water Level Sensors
  • Type Absolute, Gage, Sealed
  • Body Welded 316SS or Titanium
  • Pressure Range 0 – 2 to 304 psi
  • Output/Span 0 – 10 V, 0 – 2.5 V, 0 – 4 V, 0 – 5 VDC, 1.5 – 7.5 V, 4 – 20 mA
  • Accuracy ± .25% FS
  • Supply Voltage 9 – 28 V
  • Operating Temperature -20 – 60 °C
  • Overpressure 2X FS
  • Port Material 316 SS, FKM, Polyoxymethylene, Polyurethane, Titanium
  • Pressure Port/Fitting Ported
  • Optional lifetime lightning protection
  • Warranty Two years

KPSI 330 – 0.1% FS Submersible Level Transducer

 

Water Level Sensors -KPSI 330The KPSI 330 is a submersible hydrostatic level transducer specifically designed for small bore applications

Applications
  • Surface water monitoring
  • Well monitoring
  • Groundwater monitoring
  • Pump control
  • Slug tests
  • Level control
  • Ballast tank control
Features
  • Sensor Type Analog Water Level Sensors
  • Type Absolute, Gage, Sealed
  • Body Welded 316SS or Titanium
  • Pressure Range 0 – 2 to 304 psi
  • Output/Span 0 – 10 V, 0 – 2.5 V, 0 – 4 V, 0 – 5 VDC, 1.5 – 7.5 V, 4 – 20 mA
  • Accuracy ± .10% FS static accuracy
  • Supply Voltage 9 – 28 V
  • Operating Temperature -20 – 60 °C
  • Overpressure 2X FS
  • Port Material 316 SS, FKM, Polyoxymethylene, Polyurethane, Titanium
  • Pressure Port/Fitting Ported
  • Optional lifetime lightning protection
  • Warranty Two years

KPSI 335 – 0.05% FS Submersible Level Transducer

Water Level Sensors KPSI 342The KPSI 335 is a submersible hydrostatic level transducer specifically designed for small bore applications.

Applications
  • Surface water monitoring
  • Well monitoring
  • Groundwater monitoring
  • Pump control
  • Slug tests
  • Level control
  • Ballast tank control
Features
  • Sensor Type Analog Water Level Sensors
  • Type Absolute Gage, Sealed
  • Pressure Range 0 – 2 to 304 psi
  • Output/Span 0 – 10 V, 0 – 2.5 V, 0 – 4 V, 0 – 5 VDC, 1.5 – 7.5 V, 4 – 20 mA
  • Accuracy ± .05% FS
  • Supply Voltage 9 – 28 V
  • Operating Temperature -20 – 60 °C
  • Overpressure 2X FS
  • Port Material 316 SS, FKM, Polyoxymethylene, Polyurethane, Titanium
  • Pressure Port/Fitting Ported
  • Optional lifetime lightning protection
  • Warranty Two years

KPSI 342 0.25% TEB Submersible Level Transducer

Water Level Sensors KPSI 342

The KPSI 342 is a small bore submersible hydrostatic level transducer that combines sensor competencies with the latest in Application Specific Integrated Circuit (ASIC) technology.

Applications
  • Surface water monitoring
  • Tailrace and forebay monitoring
  • Groundwater monitoring
  • Oceanographic research
  • Down hole
  • Hydraulic Fracturing
Features
  • Sensor Type Analog Water Level Sensors
  • Type Absolute, Gage, Sealed
  • ASIC Technology Digital accuracy with analog output
  • Small Bore 0.75″ Diameter
  • Body Material Welded 316SS or Titanium
  • Pressure Range 0 – 4 to 304 psi
  • Output/Span 4 – 20 mA
  • Accuracy ± .25% TEB*
  • Supply Voltage 9 – 30 V
  • Operating Temperature -20 – 85 °C
  • Overpressure 2X FS
  • Port Material 316 SS, FKM, Polyoxymethylene, Polyurethane, Titanium
  • Pressure Port/Fitting Ported
  • Optional lifetime lightning protection
  • Warranty Two years

*TEBThe Total Error Band specification (±0.25% FS) is over the complete operating temperature range (-20 to 85ºC) of the KPSI 342. This eliminates the user having to combine multiple performance specifications to understand the total accuracy of the transducer.  Every KPSI Transducer utilizes a highly accurate pressure sensor assembly specifically designed for hostile fluids and gases. The assembly is integrated with supporting electronics in a durable waterproof housing constructed of 316 stainless steel or titanium. The attached electrical cable is custom manufactured and includes paraaramid synthetic fiber members to prevent errors due to cable elongation, and a unique water block feature that self-seals in the event of accidental cuts to the cable.

KPSI 700 – 1.0% FS Submersible Level Transducer

Water Level Sensors KPSI 700The KPSI 700 is a submersible hydrostatic level transducer specifically designed to meet the rigorous environments encountered in liquid level measurement and control.

Applications
  • Lift stations
  • Pump control
  • Level control
  • Surface water monitoring
  • Landfill leachate
  • Well monitoring
  • Groundwater monitoring
Features
  • Sensor Type Analog Water Level Sensors
  • Type Absolute, Gage, Sealed
  • Pressure Range 0 – .99 to 304 psi
  • Output/Span 0 – 10 V, 0 – 2.5 V, 0 – 4 V, 0 – 5 VDC, 1.5 – 7.5 V, 4 – 20 mA with Temperature Output, 4 – 20 mA
  • Accuracy ± 1% FS
  • Supply Voltage 9 – 28 V
  • Operating Temperature -20 – 60 °C
  • Overpressure 2X FS
  • Port Material 316 SS, FKM, Polyoxymethylene, Polyurethane, Titanium
  • Pressure Port/Fitting 1-2 MNPT, 1/4 18 MNPT, Open Face, Piezometer, Ported
  • Optional lifetime lightning protection
  • Warranty Two years

KPSI 705 – 0.25% FS Level Transducer Non-Fouling

Water Level Sensors KPSI 705

The KPSI 705 is a submersible hydrostatic level transducer specifically designed to meet the adverse environments encountered in wastewater applications.

Applications
  • Lift stations
  • Pump control
  • Level control
  • Surface water monitoring
  • Landfill leachate
  • Well monitoring
  • Groundwater monitoring
Features
    • Sensor Type Analog Water Level Sensors
    • Type Gage, Sealed
    • Pressure Range 0 – 2.5 to 50 psi
    • Output/Span 0 – 10 V, 0 – 2.5 V, 0 – 4 V, 0 – 5 VDC, 1.5 – 7.5 V, 4 – 20 mA with Temperature Output, 4 – 20 mA
    • Accuracy ± .25% FS
    • Supply Voltage 9 – 28 V
    • Operating Temperature -20 – 60 °C
    • Overpressure 2X FS
    • Port Material 316 SS, FKM, Polyurethane, PTFE, Titanium
    • Pressure Port/Fitting PTFE Coated Elastomeric Diaphragm
    • Optional lifetime lightning protection
    • Warranty Two years

KPSI 710 – 0.5% FS Level Transducer Non-Fouling

Water Level Sensors KPSI 700 710 720The KPSI 710 is a submersible level sensor with analog output for various water and industrial applications. The KPSI 710 submersible level sensor can be configured to perform to specifications under most adverse, reactive conditions.  It features a welded 316L or Titanium body and optional cable materials in order to survive long term. It offers various features that can be customized within the two day turnaround program including output signal and cable length.

Applications
  • Lift stations
  • Pump control
  • Level control
  • Surface water monitoring
  • Landfill leachate
  • Well monitoring
  • Groundwater monitoring
Features
    • Sensor Type Analog Water Level Sensors
    • Lead Time Custom Built in two days
    • Type Gage, Sealed
    • Cable Custom polyurethane or ETFE lengths
    • Body Welded 316SS or titanium
    • Nose Style Multiple available
    • Pressure Range 0 – 0 – .99 to 304 psi
    • Level Ranges Custom up to 700 ft. (210 m) H2O
    • Output/Span 0 – 10 V, 0 – 2.5 V, 0 – 4 V, 0 – 5 VDC, 1.5 – 7.5 V, 4 – 20 mA with Temperature Output, 4 – 20 mA
    • Accuracy ± .5% FS
    • Supply Voltage 9 – 28 V
    • Operating Temperature -20 – 60 °C
    • Overpressure 2X FS
    • Port Material 316 SS, FKM, Polyurethane, PTFE, Titanium
    • Pressure Port/Fitting PTFE Coated Elastomeric Diaphragm
    • Optional lifetime lightning protection
    • Warranty Two years

KPSI 720 – 0.25% FS Level Transducer Non-Fouling

Water Level Sensors KPSI 700 710 720The KPSI 720 is a submersible level sensor with analog output for various water and industrial applications. The KPSI 720 submersible level sensor can be configured to perform to specifications under most adverse, reactive conditions.  It features a welded 316L or Titanium body and optional cable materials in order to survive long term for

Applications
  • Lift stations
  • Pump control
  • Level control
  • Surface water monitoring
  • Landfill leachate
  • Well monitoring
  • Groundwater monitoring
Features
    • Sensor Type Analog Water Level Sensors
    • Lead Time Custom Built in two days
    • Type Absolute Gage, Sealed
    • Cable Custom polyurethane or ETFE lengths
    • Body Welded 316SS or titanium
    • Nose Style Multiple available
    • Pressure Range 0 – 0 – .99 to 304 psi
    • Level Ranges Custom up to 700 ft. (210 m) H2O
    • Output/Span 0 – 10 V, 0 – 2.5 V, 0 – 4 V, 0 – 5 VDC, 1.5 – 7.5 V, 4 – 20 mA with Temperature Output, 4 – 20 mA
    • Accuracy ± .25% FS
    • Supply Voltage 9 – 28 V
    • Operating Temperature -20 – 60 °C
    • Overpressure 2X FS
    • Port Material 316 SS, FKM, Polyurethane, PTFE, Titanium
    • Pressure Port/Fitting PTFE Coated Elastomeric Diaphragm
    • Bellows Long life vent filter or aneroid type
    • Optional lifetime lightning protection
    • Warranty Two years

KPSI 730 – 0.1% FS Level Transducer Non-Fouling

Water Level Sensors KPSI 700 710 720The KPSI 730 is a submersible level sensor with analog output for various water and industrial applications. The KPSI 730 submersible level sensor can be configured to perform to specifications under most adverse, reactive conditions.  It features a welded 316L or Titanium body and optional cable materials in order to survive long term for

Applications
  • Lift stations
  • Pump control
  • Level control
  • Surface water monitoring
  • Landfill leachate
  • Well monitoring
  • Groundwater monitoring
Features
    • Sensor Type Analog Water Level Sensors
    • Lead Time Custom Built in two days
    • Type Absolute Gage, Sealed
    • Cable Custom polyurethane or ETFE lengths
    • Body Welded 316SS or titanium
    • Nose Style Multiple available
    • Pressure Range 0 – 2 to 304 psi
    • Level Ranges Custom up to 700 ft. (210 m) H2O
    • Output/Span 0 – 10 V, 0 – 2.5 V, 0 – 4 V, 0 – 5 VDC, 1.5 – 7.5 V, 4 – 20 mA with Temperature Output, 4 – 20 mA
    • Accuracy ± .1% FS
    • Supply Voltage 9 – 28 V
    • Operating Temperature -20 – 60 °C
    • Overpressure 2X FS
    • Port Material 316 SS, FKM, Polyurethane, Titanium
    • Pressure Port/Fitting PTFE Coated Elastomeric Diaphragm
    • Bellows Long life vent filter or aneroid type
    • Optional lifetime lightning protection
    • Warranty Two years