Particulate Monitoring

Sick Dusthunter SP100

Probe design with forward scattered light measurement

The SICK Dusthunter SP100 particulte analyzer is just one example of the type of instruments and analyzers that are available to you when you select Cemtek KVB-Enertec as your continuous air monitoring partner and integrator. Cemtek will engineer, source, install and certify any brand, or models needed for your specific application. For more information, see the Download Tab below, or contact us at 504-500-1322, or email info@old.truwinr.com

OverviewSpecificationsApplicationsDownloads
Features
  • One-side installation
  • For very low to medium dust concentrations
  • Automatic check of zero and reference point
  • Contamination check
  • Hastelloy probe available for corrosive gas environments
  • For small to medium duct diameters
Benefits
  • Ideal for thick- or double-walled ducts
  • Approved according to EN 15267
  • Low maintenance due to self-monitoring and contamination check
  • Quick installation – no alignment required

 

 

Description Scattered light dust measuring devices
Measured values Scattered light intensity, dust concentration (after gravimetric comparison measurement)
Performance-tested measurands Scattered light intensity
Measurement principles Scattered light forward
Process temperature Standard version DHSP-T2xx: –40 °C … +220 °C

High temperature version DHSP-T2xx: –40 °C … +400 °C

Process pressure With MCU-P control unit: –50 hPa … 10 hPa

With external purge air unit: –50 hPa … 30 hPa

With instrument air (provided by the customer): –50 hPa … 100 hPa

Duct diameter ≥ 0.25 m
Conformities Approved for plants requiring approval

2001/80/EC (13. BImSchV)

2000/76/EC (17. BImSchV)

27.BImSchV

TA-Luft (Prevention of Air Pollution)

EN 15267

EN 14181

MCERTS

2010/75/EU

U.S. EPA PS-11 compliant

Enclosure rating IP 66
Interfaces and bus protocols
Ethernet Modbus TCP (via optional interface module)
Ethernet OPC (via optional interface module)
Ethernet SOPAS ET (via optional interface module)
RS-485 Modbus RTU (via optional interface module)
RS-485 PROFIBUS DP (via optional interface module)
RS-485 SOPAS ET (via optional interface module)
USB SOPAS ET
Test functions Automatic self-test (linearity, contamination, drift, aging)

Contamination limit values: Warning at 30%, fault at 40%

Manual linearity test with reference filter

Literature and Manual

SICK SP100 Manual Thumb
SP100 MANUAL DOWNLOAD
SICK SP100 Brochure Thumb
SICK CATALOG DOWNLOAD

 

 

 

 

 

Save

Save

Save

Save